ColdLogik Rear Door Cooling

ColdLogik rear door coolers provide unprecedented cooling capacity and efficiency for data centers. For facility managers and engineers seeking to address higher densities and lower energy spending, ColdLogik can lead to results such as lower PUE, savings on cooling costs and greater facility energy efficiency.

What is ColdLogik?

ColdLogik is a data center cooling solution utilizing rear door units, also known as rear door heat exchangers (RDHx) or rear door coolers (RDC). This sophisticated and precise iteration of rear door technology efficiently meets the growing cooling demands of data centers.

Unlike CRAC units, which rely on airflow methods to guide chilled air to cabinets, ColdLogik units are outfitted directly on the cabinets and cool the hot exhaust air produced by the equipment — essentially turning the cabinet itself into a containment device. Air from the cooler overwhelms the warm air leaving the adjacent cabinets, and the resulting air mix provides the predetermined room temperature. With heat removal occurring so close to the heat source, greater efficiency is achieved. The cooling units also intelligently adjust operational parameters in responses to heat removal demands, eliminating hotspots and maintaining equilibrium in the most efficient manner.


Benefits of ColdLogik?

  • High density capability.

    Up to 135 kW, to be exact. ColdLogik can handle the high density demands of GPUs, video processing, analytics and more.

  • Unrivaled PUE.

    ColdLogik has reached an independently tested PUE figure of 1.045.

  • Significant energy savings.

    The intelligent management system allows ColdLogik to operate at a high efficiency, expending less energy and achieving up to 98% energy savings compared to CRACs.

  • Reduced CAPex.

    Installing a ColdLogik solution doesn’t require aisle containment or raised flooring, lowering capital expenses for greenfield deployment.

  • Rapid ROI.

    Data center managers who install ColdLogik see significant savings in their cooling costs in 10 to 18 months.

  • Hot spot elimination.

    Temperature probes on each door detect hot spots, inciting a deployment of cold air directly to the hot spot in a more precise manner.

  • Free cooling potential.

    ColdLogik units can operate with higher water supply temperatures — up to 75oF — which ensures operation above dew point and thus no condensation. This also opens the possibility for free cooling and potentially negates the need for traditional mechanical cooling products such as chillers.

  • Scalable design.

    Despite their high density capabilities, ColdLogik rear door coolers aren’t just for high density facilities. Facility managers can deploy units every third or fourth cabinet for lower kW cabinets and incrementally add more doors as capacity increases. Click here for examples of low, medium and high duty deployment.

  • Guaranteed leak prevention.

    The sophisticated, patented Leak Prevention System (an optional addition) pulls air into the system (instead of water escaping) in the case of a breach, ensuring equipment remains protected.


Installation and Development

Data center managers can install ColdLogik in a variety of facility sizes and types — this solution goes beyond simply deploying only in high density data centers. In new-build facilities, engineers can design the room with the ColdLogik system in mind — negating the use (and capital expense) of raised flooring, containment aisles or space-consuming CRAC units. ColdLogik rear door coolers can also be retrofitted onto existing cabinets at legacy data centers at varying frequencies, depending on the kW range of the cabinets. For example, units can be installed on every third or fourth cabinet for up to 5 kW densities, while cabinets with over 12 kW densities can utilize a unit on every cabinet. The units are fixed onto the existing cabinets with an easily installed interface frame. The doors then open and close the same as before, allowing continued access to servers for maintenance.

To install ColdLogik doors, facility managers will need to ensure the water mainline is accessible within the computer room — this allows the hoses from the ColdLogik units to access the chilled water necessary for cooling. This can be done with a mechanical engineering team, with insight from the Sealco team on what connections will be necessary. Once the mechanical engineering team has prepared the room with accessible mainlines and hose connections, the installation can begin. The individual doors themselves only take about 10 to 20 minutes to install, with the entire process ranging from less than a day to up to a week (depending on the size of your deployment).

Facility managers should note that to employ ColdLogik rear rack door cooling, your facility should operate on water-based cooling (and not refrigerant-based cooling). You could ostensibly switch your system over, but the cost of switching your entire data center’s cooling base would likely not justify it.

ColdLogik units come in varying models and sizes to match the density needs of your facility:


ColdLogik in Action

Once your ColdLogik system is up and running, you’ll see an immediate drop off in hot spots, with improvements to energy savings and PUE in 10 to 18 months. You may see results such as:

  • A STIHL data center achieved 90% savings on cooling and Tier 3 (N+1) redundancy with a rear door cooling solution. See the full case study.
  • A Cambridge University facility achieved 98% power efficiency with a rear door cooling solution. See the full case study.
  • An ARM data center achieved a PUE of 1.045 demonstrated on full load with a rear door cooling solution. See the full case study.

See How ColdLogik Can Improve Your Facility’s Cooling

ColdLogik leads to significant improvements for data center managers seeking a more efficient way to cool. See how ColdLogik can fit into your facility’s system by talking with a Sealco representative. Our data center experts will analyze your current configuration and offer a best-fit ColdLogik solution for your computer room. Start improving your cooling today.

Request a quote

Let's start engineering a precise and efficient cooling solution for your facility — one that will generate impressive results. Fill out the form below and a Sealco representative will be in touch.